Primus Primetech 1.3l Stove Set

Over the years I have become far more jaded about the latest whatever piece of kit that is flavour of the month for this expert or that magazine. I confess I still waste a fair amount of cash on stuff for the outdoors, although in my defense until you have tested things in your chosen environment no amount of poking in shops or reading of reviews like this will necessarily help.

Just a selection from the stove collection
By now I have tried most cookers, from ultralight titanium meths burners, wood stoves, multi fuel, canister top and remote. My chosen playground is mountains, Scotland, North Wales, the Lakes or more likely the Pyrenees, generally the higher the better and this is the main influence on my stove choice. Bad weather high up is when I need hot food and drink if only to lift the spirits, so the ability to work well in cold and windy conditions is essential, as is simplicity in set up. Until now my favorite would be the MSR Reactor, robust, effective and simple but, and it's a big but on long trips, I find it really difficult to do much more than boil water with it.
Then whilst mooching around our local outdoor emporium, Trail Outdoor, I came across the Primus Primetech Stove.

Primus Primetech 1.3l Stove

The second pan, stove, handle and igniter all store inside the main pot for transport, and although not as neat and tidy as a Trangia did a reasonable job at making a compact unit. In use the handle clips to the pan and feels secure and the strainer lid works really well with pasta or rice. The integrated heat exchanger on the pot together with a partial windshield on the burner reminded me of the simplicity and robustness of the Reactor and with a multi month trip coming up, which will require I do more than just boil water, it had to be worth a go.
Long gone are the days when I measured the grams of every item, that lead to some very miserable trips! Now items are far more performance driven, having said that I'm not daft and I'm not strong so out went the second pot, the igniter and the transport bag, added were my trusty firesteel and a cuben fibre bag from Treadlite.

Primus Primetech 1.3l Pot and Stove 

A couple of nights camping high in Snowdonia confirmed what a great stove this appears to be, cold blustery conditions with intermittent rain the stove was fast to boil for hot drinks and simmered when asked allowing thoughts of a varied menu. The main pot is non-stick meaning at least initially I won't need the titanium chisel to keep it clean, scrambled eggs or pancakes anyone? The next 4 months will reveal any weaknesses but for now I'm really rather excited!

Post Via-Alpina Update.......

Ok so the stove did a lot of things pretty well. It does appear very frugal on gas, copes with both cold and windy conditions well. We cooked inside our tent on many occasions in foul weather without the worry of knocking anything over. Above all we even managed to "cook" scrambled eggs, vegetable curry, halloumi burgers and other real food from scratch, a real boost on a long trip.
However that was all whilst the stove was still working because on day 67 it fell apart.

This reduced the stove to a useless piece of ballast to be carried for the remaining 27 days of our hike. Earlier concerns we had over the stove's build quality now came to the fore. Within the first few weeks small bits of plastic fell off the handle, these were supposed to help the gripper hold the pan firmly without damaging the non-stick surface, they did appear from the beginning to be a bodge.

Whilst not affecting the stove or pans performance the damage is irritating and the pan handle fit was now sloppy. At the same time the pan lid started to display cracks. Now the whole system was packed in a sleeve and carried very near the top of my pack so very little on top of it, for years I have carried a reactor with a similar plastic lid with a climbing rack to no ill effect.

In conclusion from experience I expect better quality from Primus. I think the design idea is good but I am not sure the finished product lives up to either expectations in use or the Primus name.

I have spoken to Rosker, UK distributors for Primus who in turn have spoken directly to Primus who indicated there was a manufacturing batch problem that they were aware of that has now been resolved. Obviously this may or may not be comforting.

No comments:

Post a Comment